Threshold - Supermicro SSE-X3348T/R User Manual

Threshold

Clicking the T
HRESHOLD
(Figure 5-152). The parameters for this page are shown in
Table 5-129. PIM Threshold Configuration Page Parameters
Parameter
Group Threshold
Source Threshold
Switching Period
RP Threshold
RP Switching Period
Figure 5-152. PIM Threshold Configuration Page
tab brings up the PIM T
Description
This parameter is a bits-per-second (BPS) value that when it exceeds a certain
value, initiates source specific counters for a particular group.
This parameter is a bits-per-second (BPS) value that when exceeds a certain
value, initiates switching to shortest path tree.
This parameter specifies the time interval that the data rate is monitored for,
initiating the counters or for switching to SPT.
When the number of registered packets received exceeds this threshold value,
RP initiates switching to SPT.
This parameter specifies the time interval for which the registered packets are
monitored to initiate switching to SPT.
Chapter 5: Web Based Management Utility
HRESHOLD
5-179
C page
ONFIGURATION
Table 5-129.