Rstp; Rstp Global Settings; Rstp Basic Settings; Port Settings - Supermicro SSE-X3348T/R User Manual

RSTP

The RSTP link provides links to the following configuration pages:
•

RSTP Global Settings

•

RSTP Basic Settings

•

Port Settings

• Port Status
RSTP Global Settings
Clicking the G
LOBAL
(Figure 5-63), which allows you to configure RSTP global parameters. The parameters
for this page are shown in
Table 5-47. Global Configuration Page Parameters
Parameter
Select Control
Context ID
System Control
Status
Dynamic Path Cost
Calculation
Figure 5-63. Global Configuration Page
S tab brings up the G
ETTINGS
Table 5-47.
Description
This parameter allows you to select RSTP Global Settings to use in the Switch.
This parameter shows the unique ID of RSTP Global Settings.
This parameter starts or Shutsdown RSTP in the switch.
This parameter allows you to enable/disable the protocol at a global level on the
switch.
This parameter allows you to enable or disable the D
C .
ALCULATION
Chapter 5: Web Based Management Utility
C
LOBAL
5-83
page
ONFIGURATION
P C
YNAMIC ATH OST