1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
Address Summarization
Figure 5-103. RIP Interface Specific Address Summarization Page
Clicking the S
UMMARIZATION
S
UMMARIZATION
Table
5-85.
Table 5-85. RIP Interface Specific Address Summarization Page Parameters
Parameter
Interface
Aggregate Address
Subnet Mask
RIPng
The RIP6 link allows you perform RIPv6 related configuration for the switch. This can be
accomplished through the following two pages:
•
RIP6 Interface
•
Filters
tab brings up the RIP I
page
(Figure
5-103). The parameters for this page are shown in
Description
This parameter specifies the Interface ID for which the RIP aggregate address
needs to be configured.
This parameter specifies the aggregate address.
This parameter specifies the mask of the aggregate address.
NTERFACE
5-126
S
A
PECIFIC
DDRESS