Syslog - Supermicro SSE-X3348T/R User Manual

Syslog

Clicking the L
OGGING
which allows you to configure logging parameters. The parameters for this page are
shown in Table
Table 5-9. Syslog Configuration Page Parameters
Parameter
Syslog
Server IP Address
Buffer Size
Timestamp
Console Log
Facility
Traps
Figure 5-15. Syslog Configuration Page
tab brings up the S
5-9.
Description
This parameter enables or disables the Syslog feature.
This parameter specifies the Syslog server IP address. Make sure the Server IP
is reachable.
The buffer size is specfied in log entries. Max entries buffered is 200.
This parameter allows you to enable or disable the adding of a timestamp to the
log messages.
This parameter allows you to enable or disable logging to the console.
This parameter allows you to select supported facilities. The switch supports
syslog standard supported facilities
5, 6,
LOCAL LOCAL LOCAL
This parameter helps you to select a particular trap type. The following types of
traps are supported A
I , N
NFORMATIONAL OTIFICATION
Chapter 5: Web Based Management Utility
C
YSLOG ONFIGURATION
0,
LOCAL
7 and .
USER
, C , D
LERTS RITICIAL EBUGGING
and W
ARNINGS
5-25
page (Figure
1, 2,
LOCAL LOCAL LOCAL
, E , E
MERGENCIES
.
5-15),
3, 4,
LOCAL
,
RROR