Omron E5CN-HT User Manual page 44

Installation
E5EN-HT
22
Individual Mounting
(48
Note Group mounting is not possible if an E53-C3N or E53-C3DN Out-
put Unit is used for control output 1 or 2. Mount at the intervals
shown in the following diagram.
60 min.
• Waterproofing is not possible when group mounting several Controllers.
• The recommended panel thickness is 1 to 5 mm for E5CN-HT, and 1 to 8
mm for E5AN/E5EN-HT.
• Units must not be group mounted vertically. Also, group mounting is not
possible if an E53-C3N or E53-C3DN Output Unit is used for control out-
put 1 or 2. (Observe the recommended mounting intervals.)
• When group mounting several Controllers, ensure that the surrounding
temperature does not exceed the ambient operating temperature listed in
the specifications.
Group Mounting (See note.)
+1.0
number of Units 2.5)
0
Section 2-1