Omron E5CN-HT User Manual page 134

Moving to the Advanced Function Setting Level
Protect Level
Operation/Adjust-
oapt
ment Protect
0
Initial Setting/
icpt
Communica-
tions Protect
0
icpt
0
Operation Level
PV/SP
C
25.0
100.0
Initial Setting Level
Input Type
in-t
5
Initial Setting Level
Move to Ad-
amov
vanced Function
Setting Level
-169
Advanced function setting level
Parameter
init
Initialization
off
Initial Setting Level
Input Type
in-t
5
Operation Level
PV/SP
C
25.0
100.0
112
2. The Controller moves to the protect level, and the Operation/Adjustment
Protect parameter is displayed.
3. Press the M Key once to move to the Initial Setting/Communications Pro-
tect parameter.
4. Set the set value to 0. The default setting is 0 (possible to reach).
5. Press the O and M Keys simultaneously for at least one second to re-
turn to the operation level.
6. Move to the advanced function setting level.
Press the O Key for at least three seconds to move from the operation
level to the initial setting level.
7. Select the Move to Advanced Function Setting Level parameter by press-
ing the M Key.
8. Press the D Key, enter the password ( 169), and then either press the
M Key or leave the setting for at least two seconds to move to the ad-
vanced function setting level from the initial setting level.
9. To return to the initial setting level, press the O Key for at least one sec-
ond.
10. To return to the operation level, press the O Key for at least one second.
Section 4-7