Omron E5CN-HT User Manual page 287

Advanced Function Setting Level
Setting
See
See
colr
PV Change Color
Function
Mode
Constant
Setting
• The cold junction compensation external setting is enabled when the tem-
perature difference is measured using two thermocouples.
on: Internally, off: Externally
■ Related Parameters
Input type (initial setting level): Page 236
Use the PV color change function to change the color of the PV display (No. 1
display).
There are three display colors, orange, red, and green, and you can select
from the following four modes and nine types.
• Constant: This mode displays orange, red, or green all the time.
• Linked to Alarm 1: This mode switches the PV display color from red to
green when alarm 1 turns ON or from green to red when alarm 1 turns
ON.
• This mode links the color of the PV display to program operation. The
color is red while the present SP is rising, orange while the present SP is
constant, and green while the present SP is falling.
The PV display color is orange when program operation is not being used.
• Linked to PV stable band: This mode switches the PV display color
between red outside the PV stable band and green within PV stable band,
or between green outside the PV stable band and red within PV stable
band. Set the PV stable band in the PV Stable Band parameter in the
advanced function setting level.
• The default is red (red).
The following table shows the display functions that can be set using the PV
color change function.
Setting Function
org
Orange Constant: Orange
red
Red Constant: Red
grn
Green Constant: Green
Setting range
PV change color
Section 5-10
Default
on
Application example
To match the display color
with other Controller models
To match the display color
with other Controller models
To match the display color
with other Controller models
265