Omron E5CN-HT User Manual page 178

Setting the PF Key
Operating Procedure
Operation Level
PV/SP
C
25.0
100.0
Initial Setting Level
Input Type
in-t
5
Initial Setting Level
Move to Ad-
amov
vanced Function
Setting Level
-169
Advanced Function Setting Level
Parameter
init
Initialization
off
PF Setting
pf
r-r
PF Setting
pf
pfdp
Monitor/Setting
pfd1
Item 1
1
Monitor/Setting
pfd1
Item 1
7
Initial Setting Level
Input Type
in-t
5
Operation Level
C
25.0
alm
100.0
Monitor/Setting Item Level
Monitor/Setting
C
al-1
Item Display 1
0.0
156
This procedure sets the PF Setting parameter to PFDP, and the Monitor/Set-
ting Item 1 parameter to 7 (Alarm Value 1).
1. Press the O Key for at least three seconds to move from the operation
level to the initial setting level.
2. Select the Move to Advanced Function Setting Level parameter by press-
ing the M Key.
3. Press the D Key to enter the password ( 169). It is possible to move to
the advanced function setting level by either pressing the M Key or wait-
ing two seconds without pressing any key.
4. Press the M Key to select the PF Setting parameter.
5. Press the U Key to select PFDP (Monitor/Setting Item).
6. Press the M Key to select the Monitor/Setting Item 1 parameter.
7. Press the U Key to select 7 (Alarm Value 1).
8. Press the O Key for at least one second to move from the advanced
function setting level to the initial setting level.
9. Press the O Key for at least one second to move from the initial setting
level to the operation level.
10. Press the PF Key to display alarm value 1 for the current program.
Section 4-19