Omron E5CN-HT User Manual page 224

Program Setting Level
Setting
See
See
al1h
Alarm Upper Limit 1
al2h
Alarm Upper Limit 2
al3h
Alarm Upper Limit 3
al1l
Alarm Lower Limit 1
al2l
Alarm Lower Limit 2
al3l
Alarm Lower Limit 3
These parameters are used to set the alarm upper limits and alarm lower limits for alarms for which upper/
lower limits have been selected in Alarm 1 Type to Alarm 3 Type (initial setting level).
Function
Setting
See
See
202
Setting range
19,999 to 32,400
■ Related Parameters
Input type (initial setting level): Page 232
Scaling upper limit, Scaling lower limit, Decimal point (initial setting level):
Page 237
Alarm 1 type (initial setting level): Page 240
Alarm 2 type (initial setting level): Page 244
Alarm 3 type (initial setting level): Page 245
Standby sequence reset (advanced function setting level): Page 258
Auxiliary output 1 open in alarm (advanced function setting level): Page 259
Auxiliary output 2 open in alarm (advanced function setting level): Page 259
Alarm 1 latch (advanced function setting level): Page 263
Alarm 2 latch (advanced function setting level): Page 263
Alarm 3 latch (advanced function setting level): Page 263
These parameters set the upper limits and lower limits for alarms 1 to 3 of the
specified program number.
For a temperature input, the decimal point is automatically set according to
the selected sensor. For an analog input, the decimal point is set according to
Decimal Point parameter setting.
Setting range
19,999 to 32,400
■ Related Parameters
Input type (initial setting level): Page 232
Unit Default
EU 0
Alarms 1 to 3 must be assigned.
The alarm 1 to 3 type must be set to
1, 4, or 5.
Unit Default
EU 0.0
Section 5-4