Omron E5CN-HT User Manual page 289

Advanced Function Setting Level
Setting
Note
See
See
a1on
Alarm 1 ON Delay
a2on
Alarm 2 ON Delay
a3on
Alarm 3 ON Delay
Function
Setting
See
See
PV stable
band
Low
0.2 ( C or F)
Models
Controllers with Thermocouple/Resis-
tance Thermometer Universal Inputs
Controllers with Analog Inputs
Set "None" as the unit for Controllers with Analog Inputs.
■ Related Parameters
PV change color (advanced function setting level): Page 265
Alarm 1, 2, or 3 outputs are prevented from turning ON until after the delay
times set in these parameters have elapsed.
• Set the time for which the ON delay is to be enabled.
• To disable the ON delay, set 0.
Setting range
0 to 999 Second
■ Related Parameters
Alarm 1 to 3 type (initial setting level): Pages 240 to 245
PV stable
band
Within High
SP
0.2 ( C or F)
When analog inputs are used: 0.02 (%FS)
Setting range
0.1 to 999.9
0.01 to 99.99
Alarm 1 must be assigned, and the
alarm 1 type must not be 0, 12, or
13.
Alarm 2 must be assigned, and the
alarm 2 type must not be 0, 12, or
13.
Alarm 3 must be assigned, and the
alarm 3 type must not be 0, 12, or
13.
Unit Default
0
Section 5-10
PV
Unit Default
C or F 5.0
(See note.)
%FS 5.00
267