Omron E5CN-HT User Manual page 259

Initial Setting Level
in-h
Scaling Upper Limit
in-l
Scaling Lower limit
dp
Decimal Point
Function
Setting
See
See
d-u
Temperature Unit
Function
Setting
See
See
• These parameters can be used when the input type is set for an analog
input.
• When an analog input is used, scaling is performed. Set the upper limit in
the Scaling Upper Limit parameter and the lower limit in the Scaling Lower
Limit parameter.
• The Decimal Point parameter specifies the decimal point position of
parameters (set point, etc.) whose unit is EU.
• Scaling Upper Limit, Scaling Lower Limit
Parameter name
Scaling Upper Limit
Scaling Lower Limit
• Decimal Point
Parameter name
Decimal Point
Set value
0 0 digits past decimal point
1 1 digits past decimal point
2 2 digits past decimal point
3 3 digits past decimal point
■ Related Parameters
Input type (initial setting level): Page 236
• Set the temperature input unit to either C or F.
Setting range
c: C, f: F
■ Related Parameters
Input type (initial setting level): Page 236
The input type must be set for an
analog input.
Setting range
Scaling lower limit + 1 to 32400
19999 to scaling upper limit
Setting range Default
0 to 3 0
Settings Example
12345
1234.5
123.45
12.345
The input type must be set for a tem-
perature input.
Default
c
Section 5-9
Unit Default
None 100
1 None 0
237