Omron E5CN-HT User Manual page 271

Initial Setting Level
ev-*
Event Input Assignment * (*: 1 to 4)
Function
Setting
• The following functions can be assigned to event inputs 1 to 4.
• Run (OFF)/Reset (ON)
• Run (ON)/Reset (OFF)
• Auto/Manual Switch
• Reset
• Run
• Hold/Clear Hold
• Hold
• Advance
• Program Number Switch 0 to 2
• Invert Direct/Reverse Operation
• Program SP Mode/Remote SP Mode (E5AN/EN-HT only)
• Remote SP Mode/Fixed SP Mode (E5AN/EN-HT only)
• Program SP Mode/Fixed SP Mode
• 100% AT Execute/Cancel
• 40% AT Execute/Cancel
• Setting Change Enable/Disable
• Communications Write Enable/Disable
• Alarm Latch Cancel
• Wait Enable (ON)/Disable (OFF)
• Default: Models with Event Inputs 3 and 4
Event input assignment 1:
Event input assignment 2:
Event input assignment 3:
Event input assignment 4:
Models without Event Inputs 3 and 4
Event input assignment 1:
Event input assignment 2:
Setting
none
None
pr-1
Run (OFF)/Reset (ON)
pr-2
Run (ON)/Reset (OFF)
manu
Auto/Manual Switch
rst
Reset
run
Run
hld1
Hold/Clear Hold
hld2
Hold
adv
Advance
prg0
Program Number Switch 0
prg1
Program Number Switch 1
prg2
Program Number Switch 2
drs
Invert Direct/Reverse Operation
Section 5-9
An event input must be assigned.
none
none
none
none
pr-1
adv
Function
249