Chery Tiggo 2009 Service Manual page 1574

4.
CHECK RESTRAINTS CONTROL MODULE (RCM) POWER SUPPLY
• Turn ignition switch on.
• Check RCM power supply between terminal 5 and
terminal 6 in the RCM electrical connector J-001
terminal side.
Is the voltage less than 9 V?
Yes >>
Go to step 5.
No >>
Replace the RCM.
5.
CHECK DTC
• With the X-431 scan tool, read RCM DTCs.
• Refer to DTC Confirmation Procedure .
Is DTC B1620 still present?
Yes >>
Replace the RCM.
No >>
The system is now operating properly.
Reassemble the vehicle and road test to verify the customers complaint is repaired.
Chery Automobile Co., Ltd.
DIAGNOSIS & TESTING
LTSMD140001
14
45
14–