Rear Wheel Alignment
Rear Wheel Alignment Specifications
NOTE :
If the vehicle has been in an accident causing the rear axle components to be damaged, the damaged components
must be replaced before performing a rear wheel alignment.
REAR WHEEL ALIGNMENT
Camber
Toe-Individual
Rear Axle Toe-In Adjustment
1. While holding the cam bolt stationary, loosen the
lower control arm mounting cam nut (1).
(Tighten: Lower control arm mounting cam nut to
80 - 100 N·m)
2. Rotate the cam bolt head left or right until the rear
wheel Toe-in for that rear wheel is set to the pre-
ferred specification.
3. While holding the cam bolt head stationary, tighten
the Toe-in link mounting cam bolt to the specified
torque.
Chery Automobile Co., Ltd.
ON-VEHICLE SERVICE
REAR WHEEL ALIGNMENT
PREFERRED SETTING
-54'
-5'
ACCEPTABLE RANGE
-24' to -1°24'
+5' to -15'
BESM100031
10–
10
45