Sunroof Diagnosis And Testing; Sunroof Memory Relearn; Sunroof Memory Loss; Sunroof Initialization Steps - Chery Tiggo 2009 Service Manual

Sunroof Memory Relearn

Sunroof Memory Loss

The sunroof should be initialized if any of the following conditions occur:
(1) Sunroof Power Failure
• If power is lost during the operation of sunroof (the Sunroof Control Module will record a malfunction) and the
sunroof will need to be initialized.
• If power is lost within five seconds after normal operation has stopped, the Sunroof Control Module will not
have enough time to store parameters, and the sunroof will need to be initialized.
(2) Sunroof Mechanical Failure
• If after the sunroof has been used for a period of time, and can not be closed in position (there is a gap
between mechanical components). The time is generally about 2 years before the sunroof will need to be initial-
ized.

Sunroof Initialization Steps

• When the sunroof is closed, press and hold the open switch until the sunroof is completely opened, keep
pressing the switch for five seconds, then release the switch.
• Press and hold the sunroof close switch within two seconds until the sunroof is completely closed, keep press-
ing the switch for five seconds, then release the switch.
228
15–
DIAGNOSIS & TESTING
Chery Automobile Co., Ltd.