Check R/L Solenoid Power Supply - Chery Tiggo 2009 Service Manual

• Check R/L solenoid resistance as shown in the following table:
LOW/
OVERDRIVE
REVERSE
GEAR
ELECTRO-
MAGNETIC
VALVE
A/T
(L/R)
ASSEMBLY
TERMINAL
7 - 10
Resistance
(23°C)
Is the check result normal?
Yes >>
Replace the L/R Electro-Magnetic Valve with a known good one.
With the X-431, perform the solenoid actuate test.
− If the solenoid can be heard, the system is normal.
− If the solenoid can't be heard, go to the next step.
No >>
Replace the damaged L/R Electro-Magnetic Valve.
4.

CHECK R/L SOLENOID POWER SUPPLY

• Turn the ignition switch on.
• Check R/L solenoid power supply between E-086
terminal 10 and ground in the A/T assembly con-
nector E-086.
• Voltage should be more than 12 V.
Is the check result normal?
Yes >>
Go to step 6.
No >>
Go to the next step.
180
08–
DIAGNOSIS & TESTING
2ND GEAR
ELECTRO- ELECTRO-
ELECTRO-
MAGNETIC MAGNETIC
MAGNETIC
VALVE VALVE
(OD) (2ND)
6 - 10 4 - 9
7.3 - 0.69 ( )
LOW
SPEED
VALVE
(UD)
3 - 9
Chery Automobile Co., Ltd.
LTSMD080009