Chery Tiggo 2009 Service Manual page 1204

8. Remove the two shift cables (1) from the transaxle.
9. Remove the shift cable clamp (1) from the shift
cable bracket.
10. Remove the clutch master cylinder outlet pipe (1)
from the clutch slave cylinder.
(Tighten: Outlet pipe bolt to 17 ± 1 N·m)
11. Remove the starter motor (See Starter Removal &
Installation in Section 05 Starting & Charging).
12. Support the engine using an engine support fixture
or suitable jack.
13. Remove the engine to transaxle upper bolts and
remove the bracket.
(Tighten: Engine to transaxle upper bolts to 80
N·m)
Chery Automobile Co., Ltd.
ON-VEHICLE SERVICE
BESM080051
08
VISM080026
LTSM080191
261
08–