Chery Tiggo 2009 Service Manual page 1238

17. Install the gear bushing and hub of synchronizer:
• Assemble the gear bushing together with the
gear hub of synchronizer, and then inspect for
smooth operation without lockup.
• Inspect the front/rear of the interior surface of
the gear bushing for any damage.
• Inspect the synchronizer springs for any weak
springs or damage.
CAUTION: The gear bushing or gear hub of
the synchronizer are replaced as a com-
plete set.
18. Install the transaxle gear:
• Inspect the gear surface of the skew gear and
clutch gear (1) for any damage.
• Inspect the conical surface of the synchronizer
(2) for thickening, damage or wear.
• Inspect the internal diameter of the front/rear
surface of the gear.
Chery Automobile Co., Ltd.
MANUAL TRANSAXLE UNIT REPAIR
LTSM080059
08
LTSM080085
295
08–