Output Gear For Reverse Gear Disassemble; Output Gear For Reverse Inspection - Chery Tiggo 2009 Service Manual

Output Gear For Reverse Gear
Disassemble
1 - Idler Gear Shaft
2 - Needle Bearing
3 - Reverse Gear
1. Remove the thrust plate snap ring (5)
2. Separate the thrust plate (4) and the reverse gear (3).
3. Separate the needle bearing (2) and idle gear shaft (1).
Inspection
Needle Bearing
• Assemble the shaft together with the gear, and then examine whether they can slide smoothly without sagging
or noise.
• Inspect the bearing cage for any damage.
296
08–
MANUAL TRANSAXLE UNIT REPAIR
4 - Thrust Plate
5 - Thrust Plate Snap Ring
Chery Automobile Co., Ltd.
LTSM080086