Rear Wheel Speed Sensor Removal & Installation - Chery Tiggo 2009 Service Manual

5. Remove the wheel speed sensor mounting bolt (1).
(Tighten: Wheel speed sensor mounting bolt to
10 N·m)
6. Remove the front wheel speed sensor.
Rear Wheel Speed Sensor
Removal & Installation
1. Disconnect the negative battery cable.
2. Raise and support the vehicle.
3. Remove the wheel mounting nuts and the tire and wheel assembly.
(Tighten: Wheel mounting nuts to 110 N·m)
4. Disconnect the rear wheel speed sensor electrical
connector (1).
5. Remove the rear hub and bearing assembly (See Rear Hub and Bearing Removal & Installation in Section 09
Driveline & Axle).
6. Remove the rear wheel speed sensor with the rear hub and bearing.
NOTE: The rear wheel speed sensor is integrated into the rear hub and bearing assembly and a one piece
sealed unit.
78
12–
ON-VEHICLE SERVICE
Chery Automobile Co., Ltd.
LTSM120026
LTSM120027
LTSM120028