Check Dcc Electro-Magnetic Valve - Chery Tiggo 2009 Service Manual

3.

CHECK DCC ELECTRO-MAGNETIC VALVE

• Stop vehicle and turn ignition switch off.
• Disconnect A/T assembly connector.
NUMBER SOLENOID
Low Speed
1 Electro-Magnetic
Valve (UD)
2nd Gear
2 Electro-Magnetic
Valve (2nd)
Damp clutch
system control
3
Electro-Magnetic
Valve (DCC)
Overdrive
4 Electro-Magnetic
Valve (OD)
Low/reverse
Gear Electro-
5
Magnetic Valve
• Check DCC solenoid resistance as shown in the following table:
A/T
ASSEMBLY
TERMINAL
RESISTANCE
(23°C)
Is the check result normal?
Yes >>
Replace the DCC Electro-Magnetic Valve with a known good one.
With X-431, perform the solenoid actuate test.
− If the solenoid can be heard, the system is normal.
− If the solenoid can't be heard, go to the next step.
No
>>
Replace the damaged DCC Electro-Magnetic Valve.
Chery Automobile Co., Ltd.
DIAGNOSIS & TESTING
WIRE COLOR
White / Red
Yellow / Red
Brown / Yellow
Blue / Yellow
Black / Red
(L/R)
DCC ELECTRO-
MAGNETIC VALVE
5 - 9
7.3 - 0.69
08
203
08–