Front Door Weatherstrip Removal & Installation - Chery Tiggo 2009 Service Manual

Front Door Weatherstrip
Removal & Installation
1. Remove the door trim panel (See Front Door Disassembly & Assembly in Section 15 Body & Accessories).
2. Remove the front door weatherstrip (1).
3. Installation is in the reverse order of removal.
Installation Notes:
• During the weatherstrip installation, every corner should be fitted in place with no folds. The joint of the weath-
erstrip should be placed in the lower middle of the door opening. The weatherstrip should have a proper rigidity
and should not interfere with the opening and closing of the door after the lock and hinge have been adjusted.
The surface of the assembled rubber strip should not have any defects such as deformation and warp.
Chery Automobile Co., Ltd.
WEATHERSTRIP
LTSM150147
15
231
15–