Assemble
1. Using special tools MB-998801 (4), MB-998812 (1)
and MB-998818 (2), install the output shaft front
bearing race (3).
2. Install the snap ring-output shaft front bearing (1).
Select the snap ring and install it to maintain the
proper axial clearance of the output shaft front
bearing.
(Standard Value: 0.01 mm to 0.12 mm)
3. Using special tools MB-998812 (1), MB-998814 (2)
and MB-998825 (3), install the sleeve-1st gear (4).
4. Install the 1st-2nd gear synchronization ring.
Install the 1st-2nd gear synchronizer ring correctly
on the specified position of synchronizer ring
shown in the figure.
290
08–
MANUAL TRANSAXLE UNIT REPAIR
Chery Automobile Co., Ltd.
LTSM080068
LTSM080069
LTSM080070
LTSM080057