Chery Tiggo 2009 Service Manual page 1227

12. Install the clip-5th driving gear thrust plate (1).
Ensure that the thrust plate doesn't tilt when install-
ing the clip.
13. Using special tools MD-998801 (3), MD-998812 (1)
and MD-998818 (2), install the input shaft rear
bearing.
14. Install the snap ring.
Select the thickness of snap ring (1) to maintain
the proper axial clearance of input shaft rear bear-
ing.
(Standard Value: 0.01 mm to 0.12 mm)
284
08–
MANUAL TRANSAXLE UNIT REPAIR
Chery Automobile Co., Ltd.
LTSM080053
LTSM080054
LTSM080055