Chery Tiggo 2009 Service Manual page 1235

7. Install the synchronizer Ring.
8. Using special tools MB-998812 (1), MB-998814 (2)
and MB-998822 (3), install the sleeve-2nd gear (4).
9. Using special tools MB-998812 (1), MB-998814 (2)
and MB-998822 (3), install the 3rd driven gear (4).
10. Install the snap ring-3rd driven gear (1). Install the
snap ring to maintain the proper axial clearance of
the output shaft 3rd driven gear.
(Standard Value: -0.01 mm to 0.09 mm)
292
08–
MANUAL TRANSAXLE UNIT REPAIR
Chery Automobile Co., Ltd.
LTSM080073
LTSM080074
LTSM080075
LTSM080076