Input Shaft Specifications - Chery Tiggo 2009 Service Manual

14. Install the vehicle speed sensor.
15. Install the gear shifting arm assembly. Apply lubri-
cating fluid on the contact surface of the gear shift-
ing drive slider and the gear shifting arm assembly.
(The specified lubricating fluid: Mobilux Ep2)
STATUS OF SWITCH
Released
16. Inspect the backup lamp switch. Inspect the switch for broken terminal or an open circuit.
Input Shaft
Specifications
Clearance Specifications
SYNCHRONIZER RING
1st-2nd Gear
3rd-4th Gear
5th Gear
278
08–
MANUAL TRANSAXLE UNIT REPAIR
Pressed
VALUE OF A (mm)
1.10 - 1.17
1.35 - 1.90
1.10 - 1.17
Chery Automobile Co., Ltd.
LTSM080035
LTSM080036
CIRCUIT
Off
On
WEARING LIMIT
0.05 mm
0.05 mm
0.05 mm