Manual Transaxle Assembly
Removal & Installation
NOTE :
The following special tools are required to perform the repair procedure:
• MB-990938 - Handle
• MB-990935 - Installer Connector
1. Raise and support the vehicle.
2. Disconnect the negative battery cable.
3. Remove the battery and battery tray (See Battery Removal & Installation in Section 05 Starting & Charging).
4. Remove air cleaner and air duct.
5. Drain the cooling system (See Cooling System Draining Procedure in Section 06 Cooling System).
6. Remove the base mounting of the air cleaner housing assembly.
7. Remove the backup lamp switch (2) and vehicle
speed sensor (1).
260
08–
ON-VEHICLE SERVICE
Chery Automobile Co., Ltd.
LTSM020226
LTSM030029