12. Remove the selector cable clamps (1) and bracket
retaining bolts (2).
13. Remove the gear selector & shifter assembly.
14. Installation is in the reverse order of removal.
NOTE :
Selector cable can be adjusted with the adjusting bolt (1). Adjust bolts as needed to obtain proper cable adjustment.
Disassembly
1. Drive out the locking selector finger (1) pin follow-
ing the direction as shown in the diagram.
2. Drive out the locking pin (2) reverse gear lock
assembly pin.
3. Remove all of the components from shaft.
4. Thoroughly clean and check all parts, replace any
worn parts as necessary.
Chery Automobile Co., Ltd.
ON-VEHICLE SERVICE
VISM080006
08
LTSM080180
LTSM080094
267
08–