Using The Smart Setup Wizard - NETGEAR ProSafe FVG318 Reference Manual

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
2. The browser then displays the FVG318 settings home page shown in
If you do not click Logout, the wireless VPN firewall waits five minutes after there is no
activity before it automatically logs you out.

Using the Smart Setup Wizard

You can use the Smart Setup Wizard to assist with manual configuration or to verify the Internet
connection. The Smart Setup Wizard is not the same as the Smart Wizard Configuration Assistant
(as illustrated in Figure
you configure the wireless VPN firewall, the Smart Wizard Configuration Assistant will not
appear again.
To use the Smart Setup Wizard to assist with manual configuration or to verify the Internet
connection settings, follow this procedure.
1. Connect to the wireless VPN firewall by typing http://www.routerlogin.net in the address
field of your browser, then press Enter.
2. For security reasons, the firewall has its own user name and password. When prompted, enter
admin for the firewall user name and password for the firewall password, both in lower case
letters. To change the password, see
Note: The firewall user name and password are not the same as any user name or
password you may use to log in to your Internet connection.
Once you have entered your user name and password, your Web browser should find the
FVG318 wireless VPN firewall and display the home page as shown in
3. Click Setup Wizard on the upper left of the main menu.
4. Click Next to proceed. Input your ISP settings, as needed.
5. At the end of the Setup Wizard, click the Test button to verify your Internet connection. If you
have trouble connecting to the Internet, use the Troubleshooting Tips
on page 3-6 to correct basic problems, or refer to
Connecting the Firewall to the Internet
3-5) that only appears when the firewall is in its factory default state. After
"Changing the Administrator Password" on page 8-8
v1.0, October 2005
Figure
"Troubleshooting Tips"
Chapter 10, "Troubleshooting."
3-9.
Figure 3-9.
3-11