ZyXEL Communications ISG50-ISDN User Manual page 732

Chapter 55 File Manager
The firmware update can take up to five minutes. Do not turn off or reset
the ISG50 while the firmware update is in progress!
Figure 493 Maintenance > File Manager > Firmware Package
The following table describes the labels in this screen.
Table 292 Maintenance > File Manager > Firmware Package
LABEL
Boot
Module
Current
Version
Released
Date
File Path
Browse...
Upload
After you see the Firmware Upload in Process screen, wait two minutes before logging into the
ISG50 again.
Figure 494 Firmware Upload In Process
Note: The ISG50 automatically reboots after a successful upload.
The ISG50 automatically restarts causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Figure 495 Network Temporarily Disconnected
732
DESCRIPTION
This is the version of the boot module that is currently on the ISG50.
This is the firmware version and the date created.
This is the date that the version of the firmware was created.
Type in the location of the file you want to upload in this field or click Browse ... to find
it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
ISG50 User's Guide