The Group Access Code Screen - ZyXEL Communications ISG50-ISDN User Manual

Integrated service gateway

Hide thumbs Also See for ISG50-ISDN:

Table of Contents

Table 159 Batch Add SIP Extensions (continued)

29.4 The Group Access Code Screen

Use this screen to manage the access codes for authority groups on the ISG50. To access this

screen, click Configuration > PBX > Extension Management > Group Access Code.

Figure 302 Configuration > PBX > Extension Management > Group Access Code

Each field is described in the following table.

Table 160 Configuration > PBX > Extension Management > Group Access Code

Enable Group

ISG50 User's Guide

This column indicates the codec types used by this extension. You can organize the

priority of the codecs by highlighting it and clicking the Up or Down buttons to move

the codec higher or lower in priority. The SIP extension attempts to use the higher

priority codecs first and tries the lower priority codecs next. You can remove a codec

type from being used from this extension by double-clicking it or highlighting it and

hitting the Left button.

Click OK to save your customized settings and exit this screen.

Click Cancel to exit this screen without saving.

Select this to enable the group access code feature.

Click this to change the access code for an authority group.

This field is a sequential value, and it is not associated with a specific entry.

This is the authority group for which you can configure a call access code. You can only

create one call access code per authority group.

Use this field to view or enter the access code for this authority group.

Click Apply to save your changes back to the ISG50.

Click Reset to return the screen to its last-saved settings.

Chapter 29 Extension Management