Table of Contents
Advertisement
Chapter 3 Web Configurator
Type the user name (default: "admin") and password (default: "1234").
3
If your account is configured to use an ASAS authentication server, use the OTP (One-Time
Password) token to generate a number. Enter it in the One-Time Password field. The number is
only good for one login. You must use the token to generate a new number the next time you log in.
Click Login. If you logged in using the default user name and password, the Update Admin Info
4
screen
(Figure 18 on page
Figure 18 Update Admin Info Screen
The screen above appears every time you log in using the default user name and default password.
If you change the password for the default user account, this screen does not appear anymore.
Follow the directions in this screen. If you change the default password, the Login screen
17 on page
43) appears after you click Apply. If you click Ignore, the Installation Setup
Wizard opens if the ISG50 is using its default configuration; otherwise the dashboard appears.
44
44) appears. Otherwise, the dashboard
(Figure 19 on page
45) appears.
(Figure
ISG50 User's Guide
Advertisement
Table of Contents
Troubleshooting
