Auto Attendant Settings: Night Service - ZyXEL Communications ISG50-ISDN User Manual

31.3.5 Auto Attendant Settings: Night Service

Use this screen to configure Night Service settings for this auto-attendant. You only need to
configure this screen if you want the auto-attendant to perform different actions outside of regular
office hours.
In the Configuration > PBX > Outbound Line Management > Auto-Attendant > Customized
screen click the Add or Edit icon for an item in the auto-attendant list and select the Night
Service tab to view a screen as shown next.
Figure 334 Night Service Setting
Each field is described in the following table.
Table 181 Night Service Setting
LABEL
Enable Night
Service
Upload Audio File
Record Audio File
Audio File State
ISG50 User's Guide
DESCRIPTION
Select this to activate the night service settings for this auto-attendant or clear it to turn
them off.
Click Browse to locate an audio file to be used as the auto-attendant greeting message,
and Upload to copy it to IP-PBX.
The audio file you upload must meet the following criteria:
• PCM format, 16 kHz, 16-bit, mono mode (*.wav).
• The total play time of all the AA audio files combined must be less than 30 minutes.
Click this to record an audio file through the extension set as the recording peer.
This indicates whether an audio file has been uploaded to the ISG50 or not. You can also
Playback the audio file to hear how it sounds.
Chapter 31 Auto-attendant
513