ZyXEL Communications ISG50-ISDN User Manual page 801

Table 324 Policy Route Logs
LOG MESSAGE
Can't open bwm_entries
Can't open link_down
Cannot get handle from
UAM, user-aware PR is
disabled
mblock: allocate
memory failed!
pt: allocate memory
failed!
To send message to
policy route daemon
failed!
The policy route %d
allocates memory fail!
The policy route %d
uses empty user group!
The policy route %d
uses empty source
address group!
The policy route %d
uses empty destination
address group!
The policy route %d
uses empty service
group
Policy-route rule %d
was inserted.
Policy-route rule %d
was appended.
Policy-route rule %d
was modified.
Policy-route rule %d
was moved to %d.
Policy-route rule %d
was deleted.
Policy-route rules
were flushed.
BWM has been
activated.
BWM has been
deactivated.
ISG50 User's Guide
DESCRIPTION
Policy routing can't activate BWM feature.
Policy routing can't detect link up/down status.
User-aware policy routing is disabled due to some reason.
Allocating policy routing rule fails: insufficient memory.
Allocating policy routing rule fails: insufficient memory.
Failed to send control message to policy routing manager.
Allocating policy routing rule fails: insufficient memory.
%d: the policy route rule number
Use an empty object group.
%d: the policy route rule number
Use an empty object group.
%d: the policy route rule number
Use an empty object group.
%d: the policy route rule number
Use an empty object group.
%d: the policy route rule number
Rules is inserted into system.
%d: the policy route rule number
Rules is appended into system.
%d: the policy route rule number
Rule is modified.
%d: the policy route rule number
Rule is moved.
1st %d: the original policy route rule number
2nd %d: the new policy route rule number
Rule is deleted.
%d: the policy route rule number
Policy routing rules are cleared.
The global setting for bandwidth management on the ISG50 has been
turned on.
The global setting for bandwidth management on the ISG50 has been
turned off.
Appendix A Log Descriptions
801