Configure A Wan Ethernet Interface; Configure Port Roles; Configure Zones - ZyXEL Communications ISG50-ISDN User Manual

Chapter 7 General Tutorials

7.1.1 Configure a WAN Ethernet Interface

You need to assign the ISG50's wan1 interface a static IP address of 1.2.3.4.
Click Configuration > Network > Interface > Ethernet and double-click the wan1 interface's
entry. Select Use Fixed IP Address and configure the IP address, subnet mask, and default
gateway settings and click OK.
Figure 72 Configuration > Network > Interface > Ethernet > Edit wan1

7.1.2 Configure Port Roles

Here is how to take the P4 port from the lan2 interface and add it to the dmz interface.
Click Configuration > Network > Interface > Role.
1
Under P4 select the dmz (DMZ) radio button and click Apply.
2
Figure 73 Configuration > Network > Interface > Port Roles Example

7.1.3 Configure Zones

Do the following to create a VPN zone.
Click Configuration > Network > Zone and then double-click the IPSec_VPN entry.
1
108
ISG50 User's Guide