Firewall Rule Configuration Example - ZyXEL Communications ISG50-ISDN User Manual

Integrated service gateway
Hide thumbs Also See for ISG50-ISDN:
Table of Contents

Advertisement

Chapter 23 Firewall
The rule for the CEO must come before the rule that blocks all LAN1 to WAN IRC traffic. If the rule
that blocks all LAN1 to WAN IRC traffic came first, the CEO's IRC traffic would match that rule and
the ISG50 would drop it and not check any other firewall rules.

23.1.4 Firewall Rule Configuration Example

The following Internet firewall rule example allows Doom players from the WAN to IP addresses
192.168.1.10 through 192.168.1.15 (Dest_1) on the LAN1.
Click Configuration > Firewall. In the summary of firewall rules click Add in the heading row to
1
configure a new first entry. Remember the sequence (priority) of the rules is important since they
are applied in order.
Figure 236 Firewall Example: Firewall Screen
At the top of the screen, click Create new Object > Address.
2
The screen for configuring an address object opens. Configure it as follows and click OK.
3
Figure 237 Firewall Example: Create an Address Object
Click Create new Object > Service.
4
358
ISG50 User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Isg50

Table of Contents