Bri Trunk Screen - ZyXEL Communications ISG50-ISDN User Manual

Integrated service gateway

Hide thumbs Also See for ISG50-ISDN:

Table of Contents

Chapter 10 Monitor

10.17 BRI Trunk Screen

This screen displays status information about external connections via BRI interfaces. Click

Monitor > PBX > BRI Trunk to display this screen.

Figure 159 Monitor > PBX > BRI Trunk

The following table describes the labels in this screen.

Table 51 Monitor > PBX > BRI Trunk

General Settings

Refresh interval

Use this section to specify your query criteria. You can select an attribute, value pair for

your search. You can choose to query by:

Direction - select which direction of calls you want to view status details about ISDN

BRI lines. Select In for incoming calls, Out for outgoing calls or all for both incoming

and outgoing calls. Alternatively, select N/A to display configured BRI trunk(s)

without any calls over it.

Click Query to update the status detail table in the BRI Trunk Summary section of the

Enter how often (seconds) you want the ISG50 to update this screen. Click Apply to

update the screen immediately.

If you do not want this screen to update periodically, enter 0.

This section displays the status detail table.

This field is a sequential value, and it is not associated with a specific entry.

This field displays the port number of the ISDN BRI port.

This field displays the outbound line group name to which an ISDN BRI line is assigned.

This field displays the caller identifier of a call or N/A for configured BRI trunk(s) without

any calls over it.

This field displays the dialed number of a call or N/A for configured BRI trunk(s) without

any calls over it.

This field displays In for an incoming call, Out for an outgoing call, none for configured

BRI trunk(s) without any calls over it.

ISG50 User's Guide