Set Up User Accounts - ZyXEL Communications ISG50-ISDN User Manual

example that does not include priorities for different types of traffic. See
for more on bandwidth management.
Table 18 User-aware Access Control Example
GROUP (USER)
Finance (Leo)
Engineer (Steven)
Sales (Debbie)
Boss (Andy)
Guest (guest)
Others
The users are authenticated by an external RADIUS server at 192.168.1.200.
First, set up the user accounts and user groups in the ISG50. Then, set up user authentication
using the RADIUS server. Finally, set up the policies in the table above.
The ISG50 has its default settings.

7.5.1 Set Up User Accounts

Set up one user account for each user account in the RADIUS server. If it is possible to export user
names from the RADIUS server to a text file, then you might create a script to create the user
accounts instead. This example uses the Web Configurator.
Click Configuration > Object > User/Group > User. Click the Add icon.
1
Enter the same user name that is used in the RADIUS server, and set the User Type to ext-user
2
because this user account is authenticated by an external server. Click OK.
Figure 86 Configuration > Object > User/Group > User > Add
Repeat this process to set up the remaining user accounts.
3
ISG50 User's Guide
WEB WEB
SURFING BANDWIDTH
Yes 200K
Yes 100K
Yes 100K
Yes 100K
Yes 50K
No ---
Chapter 7 General Tutorials
Chapter 25 on page 397
MSN
No
No
Yes (M-F, 08:30~18:00)
Yes
No
No
LAN1-TO-DMZ
ACCESS
Yes
No
Yes
Yes
No
No
117