The Recurring Schedule Add/Edit Screen - ZyXEL Communications ISG50-ISDN User Manual

Chapter 47 Schedules
Table 247 Configuration > Object > Schedule > Add (One Time) (continued)
LABEL
StopDate
StopTime
OK
Cancel

47.2.2 The Recurring Schedule Add/Edit Screen

The Recurring Schedule Add/Edit screen allows you to define a recurring schedule or edit an
existing one. To access this screen, go to the Schedule screen (see
click either the Add icon or an Edit icon in the Recurring section.
Figure 419 Configuration > Object > Schedule > Add (Recurring)
The Year, Month, and Day columns are not used in recurring schedules and are disabled in this
screen. The following table describes the remaining labels in this screen.
Table 248 Configuration > Object > Schedule > Add (Recurring)
LABEL
Configuration
Name
Date Time
628
DESCRIPTION
Specify the year, month, and day when the schedule ends.
Year - 1900 - 2999
Month - 1 - 12
Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Hour - 0 - 23
Minute - 0 - 59
Specify the hour and minute when the schedule ends.
Hour - 0 - 23
Minute - 0 - 59
Click OK to save your changes back to the ISG50.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Type the name used to refer to the recurring schedule. You may use 1-31
alphanumeric characters, underscores(
cannot be a number. This value is case-sensitive.
Section 47.2 on page
), or dashes (-), but the first character
_
626), and
ISG50 User's Guide