Adding A Radius Server - ZyXEL Communications ISG50-ISDN User Manual

Integrated service gateway

Hide thumbs Also See for ISG50-ISDN:

Table of Contents

The following table describes the labels in this screen.

Table 251 Configuration > Object > AAA Server > RADIUS

Server Address

48.3.1 Adding a RADIUS Server

Click Configuration > Object > AAA Server > RADIUS to display the RADIUS screen. Click the

Add icon or an Edit icon to display the following screen. Use this screen to create a new AD or

LDAP entry or edit an existing one.

Figure 426 Configuration > Object > AAA Server > RADIUS > Add

ISG50 User's Guide

Click this to create a new entry.

Double-click an entry or select it and click Edit to open a screen where you can

modify the entry's settings.

To remove an entry, select it and click Remove. The ISG50 confirms you want to

remove it before doing so.

Select an entry and click Object References to open a screen that shows which

settings use the entry. See

This field displays the index number.

This is the name of the RADIUS server entry.

This is the address of the RADIUS server.

Click Apply to save the changes.

Click Reset to return the screen to its last-saved settings.

Section 12.3.2 on page 246

Chapter 48 AAA Server

for an example.