ZyXEL Communications ISG50-ISDN User Manual page 623

To access this screen, log in to the Web Configurator, and click Configuration > Object > Service
> Service Group.
Figure 415 Configuration > Object > Service > Service Group
The following table describes the labels in this screen. See
information as well.
Table 244 Configuration > Object > Service > Service Group
LABEL
Add
Edit
Remove
Object
References
#
Name
Description
ISG50 User's Guide
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's
settings.
To remove an entry, select it and click Remove. The ISG50 confirms you want to
remove it before doing so.
Select an entry and click Object References to open a screen that shows which
settings use the entry. See
This field is a sequential value, and it is not associated with a specific service
group.
This field displays the name of each service group.
By default, the ISG50 uses services starting with "Default_Allow_" in the firewall
rules to allow certain services to connect to the ISG50.
This field displays the description of each service group, if any.
Section 46.3.1 on page 624
Section 12.3.2 on page 246
Chapter 46 Services
for more
for an example.
623