Chapter 5 Quick Setup
5.5.2 VPN Express Wizard - Summary
This screen provides a read-only summary of the VPN tunnel's configuration and also commands
that you can copy and paste into another ISG50's command line interface to configure it.
Figure 55 VPN Express Wizard: Step 4
• Rule Name: Identifies the VPN gateway policy.
• Secure Gateway: IP address or domain name of the remote IPSec device. If this field displays
Any, only the remote IPSec device can initiate the VPN connection.
• Pre-Shared Key: VPN tunnel password. It identifies a communicating party during a phase 1
IKE negotiation.
• Local Policy: (Static) IP address and subnet mask of the computers on the network behind your
ISG50 that can use the tunnel.
• Remote Policy: (Static) IP address and subnet mask of the computers on the network behind
the remote IPSec device that can use the tunnel. If this field displays Any, only the remote IPSec
device can initiate the VPN connection.
• Copy and paste the Configuration for Secure Gateway commands into another ISG50's
command line interface to configure it to serve as the other end of this VPN tunnel. You can also
use a text editor to save these commands as a shell script file with a ".zysh" filename extension.
Then you can use the file manager to run the script in order to configure the VPN connection. See
the commands reference guide for details on the commands displayed in this list.
80
ISG50 User's Guide