ZyXEL Communications ISG50-ISDN User Manual page 819

Table 332 Interface Logs (continued)
LOG MESSAGE
"SIM card has been
successfully unlocked
by PUK code on
interface cellular%d.
"Incorrect PUK code of
interface cellular%d.
Please check the PUK
code setting.
"SIM card of interface
cellular%d in %s is
damaged or not
inserted. Please
remove the device,
then check the SIM
card.
"SIM card of interface
cellular%d in %s is
locked. Please enter
PUK code to unlock.
"Incorrect PIN code of
interface cellular%d.
Please check the PIN
code setting.
"Unable to query the
signal quality from
the device in %s.
Please try to remove
then insert the
device.
"Interface cellular%d
cannot connect to the
service provider.
"Interface cellular%d
is configured with
incorrect APN.
"Interface cellular%d
is configured with
incorrect phone
number.
"Interface cellular%d
is configured with
incorrect username or
password.
"Interface cellular%d
is configured with
device %s, but current
inserted device is %s.
"Cellular device [%s
%s] has been inserted
into %s.
ISG50 User's Guide
DESCRIPTION
You entered the correct PUK code and unlocked the SIM card for the
cellular device associated with the listed cellular interface (%d).
You entered an incorrect PUK code so you were not able to unlock the
SIM card for the cellular device associated with the listed cellular
interface (%d).
The SIM card for the cellular device associated with the listed cellular
interface (%d) cannot be detected. The SIM card may be missing, not
inserted properly, or damaged. Remove the device and check its SIM
card. If it does not appear to be damaged, try re-inserting the SIM
card.
The SIM card for the cellular device associated with the listed cellular
interface (%d) is locked. This may be because the PIN code was
entered incorrectly more than three times. You need to enter the PUK
code to unlock the SIM card. .
The listed cellular interface (%d) does has the wrong PIN code
configured.
The ISG50 could not check the signal strength for the listed cellular
interface (%d). This could be due to an error or being out of range of
the ISP's cellular station.
The listed cellular interface (%d) cannot connect to the ISP. This
could be due to an error or being out of range of the ISP's cellular
station.
The listed cellular interface (%d) does not have the correct APN
(Access Point Name) configured.
The listed cellular interface (%d) does not have the correct phone
number configured.
The listed cellular interface (%d) does not have the correct user
name and password configured.
The listed cellular interface (%d) is configured for a particular cellular
device (first %s), but a different cellular device (second %s) is
inserted.
The cellular device (identified by its manufacturer and model) has
been inserted in or connected to the specified slot.
Appendix A Log Descriptions
819