Table of Contents
Advertisement
Table 102 Configuration > Network > NAT (continued)
LABEL
Mapped Port
Apply
Reset
18.2.1 The NAT Add/Edit Screen
The NAT Add/Edit screen lets you create new NAT rules and edit existing ones. To open this
window, open the NAT summary screen. (See
icon or Edit icon to open the following screen.
Figure 214 Configuration > Network > NAT > Add
The following table describes the labels in this screen.
Table 103 Configuration > Network > NAT > Add
LABEL
Create new
Object
Enable Rule
Rule Name
ISG50 User's Guide
DESCRIPTION
This field displays the new destination port(s) for the packet. This field is blank if
there is no restriction on the original destination port.
Click this button to save your changes to the ISG50.
Click this button to return the screen to its last-saved settings.
DESCRIPTION
Use to configure any new settings objects that you need to use in this screen.
Use this option to turn the NAT rule on or off.
Type in the name of the NAT rule. The name is used to refer to the NAT rule. You
may use 1-31 alphanumeric characters, underscores(
first character cannot be a number. This value is case-sensitive.
Section 18.2 on page
324.) Then, click on an Add
), or dashes (-), but the
_
Chapter 18 NAT
325
Advertisement
Table of Contents
Troubleshooting
