ZyXEL Communications ISG50-ISDN User Manual page 810

Appendix A Log Descriptions
Table 327 Connectivity Check Logs (continued)
LOG MESSAGE
The connectivity-
check is activate for
%s interface
The connectivity-
check is fail for %s
interface
Can't get gateway IP
of %s interface
Can't alloc memory
Can't load %s module
Can't handle 'isalive'
function of %s module
Create socket error
Can't get IP address
of %s interface
Can't get flags of %s
interface
Can't get remote
address of %s
interface
Can't get NETMASK
address of %s
interface
Can't get BROADCAST
address of %s
interface
Can't use MULTICAST IP
for destination
The destination is
invalid, because
destination IP is
broadcast IP
Can't get MAC address
of %s interface!
To send ARP REQUEST
error!
The %s routing status
seted to DEAD by
connectivity-check
810
DESCRIPTION
The link status of interface is still activate after check of connectivity
check process.
%s: interface name
The link status of interface is fail after check of connectivity check
process.
%s: interface name
The connectivity check process can't get the gateway IP address for
the specified interface.
%s: interface name
The connectivity check process can't get memory from OS.
The connectivity check process can't load module for check link-
status.
%s: the connectivity module, currently only ICMP available.
The connectivity check process can't execute 'isalive' function from
module for check link-status.
%s: the connectivity module, currently only ICMP available.
The connectivity check process can't get socket to send packet.
The connectivity check process can't get IP address of interface.
%s: interface name.
The connectivity check process can't get interface configuration.
%s: interface name
The connectivity check process can't get remote address of PPP
interface
%s: interface name
The connectivity check process can't get netmask address of
interface.
%s: interface name
The connectivity check process can't get broadcast address of
interface
%s: interface name
The connectivity check process can't use multicast address to check
link-status.
The connectivity check process can't use broadcast address to check
link-status.
The connectivity check process can't get MAC address of interface.
%s: interface name
The connectivity check process can't send ARP request packet.
The interface routing can't forward packet.
%s: interface name
ISG50 User's Guide