Table of Contents
Advertisement
Table 301 Maintenance > Packet Flow Explore > Routing Status (continued)
LABEL
Metric
Flags
Persist
The following fields are available if you click Policy Route in the Routing Flow section.
#
PR #
Incoming
Source
Destination
Service
DSCP Code
Next Hop
Type
Next Hop
Info
The following fields are available if you click 1-1 SNAT in the Routing Flow section.
#
NAT Rule
Source
Destination
Outgoing
Gateway
The following fields are available if you click SiteToSite VPN or Dynamic VPN in the Routing Flow section.
#
Source
Destination
VPN Tunnel
The following fields are available if you click Default WAN Trunk in the Routing Flow section.
Forwarding
Traffic
ISG50 User's Guide
DESCRIPTION
This is the route's priority among the displayed routes.
This indicates additional information for the route. The possible flags are:
•
A - this route is currently activated
•
S - this is a static route
•
C - this is a direct connected route
•
O - this is a dynamic route learned through OSPF
•
R - this is a dynamic route learned through RIP
•
G - the route is to a gateway (router) in the same network.
•
! - this is a route which forces a route lookup to fail.
•
B - this is a route which discards packets.
•
L - this is a recursive route.
This is the remaining time of a dynamically learned route. The ISG50 removes the route after
this time period is counted down to zero.
This field is a sequential value, and it is not associated with any entry.
This is the number of an activated policy route. If you have configured a schedule for the
route, this screen only displays the route at the scheduled time.
This is the interface on which the packets are received.
This is the source IP address(es) from which the packets are sent.
This is the destination IP address(es) to which the packets are transmitted.
This is the name of the service object. any means all services.
This is the DSCP value of incoming packets to which this policy route applies. See
on page 291
for more information.
This is the type of the next hop to which packets are directed.
•
This is the main route if the next hop type is Auto.
•
This is the interface name and gateway IP address if the next hop type is Interface /GW.
•
This is the tunnel name if the next hop type is VPN Tunnel.
•
This is the trunk name if the next hop type is Trunk.
This field is a sequential value, and it is not associated with any entry.
This is the name of an activated 1:1 or Many 1:1 NAT rule in the NAT table.
This is the original source IP address(es). any means any IP address.
This is the original destination IP address(es). any means any IP address.
This is the name of an interface which transmits packets out of the ISG50.
This is the IP address of the gateway in the same network of the outgoing interface.
This field is a sequential value, and it is not associated with any entry.
This is the IP address(es) of the local VPN network.
This is the IP address(es) for the remote VPN network.
This is the name of the VPN tunnel.
This section displays information about traffic going through the ISG50.
Chapter 57 Packet Flow Explore
Section 14.2
749
Advertisement
Table of Contents
Troubleshooting
