Static Routes; Zones - ZyXEL Communications ISG50-ISDN User Manual

PREREQUISITES
Example: You have an FTP server connected to P6 (in the DMZ zone). You want to limit the
amount of FTP traffic that goes out from the FTP server through your WAN connection.
Create an address object for the FTP server (Object > Address).
1
Click Configuration > Network > Routing > Policy Route to go to the policy route
2
configuration screen. Add a policy route.
Name the policy route.
3
Select the interface that the traffic comes in through (P3 in this example).
4
Select the FTP server's address as the source address.
5
You don't need to specify the destination address or the schedule.
6
For the service, select FTP.
7
For the Next Hop fields, select Interface as the Type if you have a single WAN connection or
8
Trunk if you have multiple WAN connections.
Select the interface that you are using for your WAN connection (wan1 and wan2 are the default
9
WAN interfaces). If you have multiple WAN connections, select the trunk.
10 Specify the amount of bandwidth FTP traffic can use. You may also want to set a low
priority for FTP traffic.
Note: The ISG50 checks the policy routes in the order that they are listed. So make sure
that your custom policy route comes before any other routes that would also match
the FTP traffic.

6.6.6 Static Routes

Use static routes to tell the ISG50 about networks not directly connected to the ISG50.
MENU ITEM(S)
PREREQUISITES

6.6.7 Zones

See Section 6.3 on page 92
tunnels. The ISG50 uses zones, not interfaces, in many security settings, such as firewall rules and
remote management.
ISG50 User's Guide
Criteria: users, user groups, interfaces (incoming), IPSec VPN (incoming),
addresses (source, destination), address groups (source, destination),
schedules, services, service groups
Next-hop: addresses (HOST gateway), IPSec VPN, trunks, interfaces
NAT: addresses (translated address), services and service groups (port
triggering)
Configuration > Network > Routing > Static Route
Interfaces
for background information. A zone is a group of interfaces and VPN
Chapter 6 Configuration Basics
99