ZyXEL Communications ISG50-ISDN User Manual page 776

Appendix A Log Descriptions
Table 308 PBX Call Service Logs (continued)
LOG MESSAGE
The call was reject due
to there are % memebrs
in conference.
The call was reject due
to teher are % memebrs
in conference room %s
The PBX supplemental service logs deal with supplemental service errors.
Table 309 PBX Supplemental Service Logs
LOG MESSAGE
The call can't be
recorded due to usb
storage is not ready.
The call can't be
recorded due to total
recording time has
reached the Call
Recording Quota.
The call can't be
recorded due to reach
the maximum call
recording license: %d.
The call can't be
recorded due to g.723
codec doesn't support
in recording function.
The call can not be
parked due to no more
parking space.
The call was dropped
due to codec is not
compatible.
There is no any DTMF
can be detected while
call transfer.
The call that parked by
extension %s was
timeout.
Group pickup was failed
due to no incoming call
was found.
Call transfer timeout.
Extension: %s Collected
digit: '%s.
776
DESCRIPTION
Conference licenses have reached the maximun number of %d.
1st %s: Conference license number
The call was rejected because there are % memebrs in conference
room %s .
1st %d: Count of members
2nd %s: Conference room number
DESCRIPTION
The call cannot be recorded because the usb storage is not ready.
The call cannot be recorded because the total call recording time
has reached the Call Recording Quota.
The call cannot be recorded because the maximum call recording
license %d has been reached.
1st %s: Recoding license
The call cannot be recorded because it is using the g.723 codec
which the call recording function does not support.
The call cannot be parked because all of the call parking slots are
full.
The call was dropped because the codec is not compatible.
The ISG50 did not detect any DTMF during the call transfer.
The call parked by extension %s timed out.
1st %s: Extension name
Group pickup did not work because there was no available call to
pick up.
An attempted call transfer timed out before enough digits were
detected to complete the transfer. [%s Collected: '%s']
1st %s: Extension Number
2nd %d: Collected digit
ISG50 User's Guide