Custom section
The 'Custom' section contains the frequently used settings. Figure 27 on
page 75 shows an example with the following settings.
Media
Input mode
Zoom
File mode
The key operator defines the contents in the Océ Settings Editor on the Océ
Power Logic controller (see 'Define the contents of the custom card' on
page 184). The key operator can change the contents, depending on the
configuration, for example into the following settings.
Media
Input mode
Folding
Language
Exposure
Original section
The 'Original' section contains all settings for the scanner input, the original
(see Figure 31 on page 81). The settings are divided over the following cards.
Scanner
Image
Sheet
Feeding
[31] The cards of the 'Original' section at the left side with an active 'Image' card
Using the Océ TDS600 scanner to copy
81