Maintenance Of The Reinforcement Unit; A New Tape Roll - Oce TDS860 User Manual

Maintenance of the Reinforcement Unit

This section covers maintenance activities for the optional reinforcement unit
of the folder, such as:
Insert a new tape roll
Empty the waste box
Clean the reinforcement knives
Attention:
reinforcement strips from Océ.

A new tape roll

When the tape roll is empty while the printer is in stand-by, one of these
messages will appear on the display:
'Load reinforcement tape'
'Reinforcement unit empty' (if the printer was running when the roll ran out
of tape).
When a tape roll is empty while the printer is running, this message will be
accompanied by a picture of the printer with the side door of the reinforcement
unit blinking (see figure 145).
252 Océ TDS860 User Manual
To avoid damage to the reinforcement unit, only use the original